DI-1DL
- Amplification RS-485 signal
The RS-485 interface repeater DI-1PSM is designed for signal amplification on the RS-485 interface (BMS bus). This is required when the network distance exceeds a length of 1200 m and when more than 31 bus nodes exist.
- Amplification RS-485 signal
The RS-485 interface repeater DI-1PSM is designed for signal amplification on the RS-485 interface (BMS bus). This is required when the network distance exceeds a length of 1200 m and when more than 31 bus nodes exist.
Features
- Plastic enclosure for DIN rail mounting
- Dynamic baud rate setting
- Galvanic separation between the input and output circuit and the power supply – overvoltage protection
- Supply voltage 85…260 V, AC 50…60 Hz
Applications
- Extension of the maximum possible bus length by 1200 m in BMS systems (EDS, RCMS, MEDICS® systems)
- Extension of the maximum possible bus nodes by 31
- Protection against spikes by galvanic separation between the input and output circuit and the power supply
DI-1DL Variant(s)
| Type | Supply voltage US | Art. No. |
|---|---|---|
| DI-1DL | AC 85…260 V, 50…60 Hz | B95012047 |
Downloads for DI-1DL
| Name | Category | Size | Language | Timestamp | D-/B-Number |
|---|---|---|---|---|---|
| DI-1DL | CE Declarations of conformity | 74.3 KB | 2022/08/1212.08.2022 | ||
| DI-1DL | Datasheets | 266.8 KB | DE | 2019/05/1313.05.2019 | D00125 |
| DI-1DL | Datasheets | 265.1 KB | EN | 2019/05/1313.05.2019 | D00125 |
| DI-1DL | Datasheets | 224.3 KB | ES | 2019/05/1313.05.2019 | D00125 |
| DI-1DL | Manuals | 497.3 KB | DE | 2019/05/1313.05.2019 | D00125 |
| DI-1DL | Manuals | 497.3 KB | EN | 2019/05/1313.05.2019 | D00125 |