Electric motors or pumps powered by gentle starters or frequency converters are increasingly found in modern systems. However, these generate critical harmonic vibrations in the feeding AC system. Regular RCD or simple insulation monitors (e.g. 3 lamp method or 2 voltmeter process) cannot maintain an overview of this. The leakage currents and the load on the insulation of the motors also have to be observed. There is a need for modern monitoring equipment from Bender which recognises and reports these problems quickly.
| Name | Category | Size | Language | Timestamp | D-/B-Number |
|---|---|---|---|---|---|
| Product Overview ISOMETER®/ISOSCAN® | Product Overviews | 5.3 MB | EN | 2024/02/1616.02.2024 | |
| Product Overview - Residual Current Monitoring | Product Overviews | 6.3 MB | EN | 2024/10/2929.10.2024 | |
| Insulation Fault Location - Planning and Setup | Technical article | 112.4 KB | EN | 2019/05/1313.05.2019 | |
| Electrical Safety in Control and Auxiliary Circuits | Technical article | 632.6 KB | EN | 2019/05/1313.05.2019 |
Products
Insulation monitoring device for inverter applications and large industrial plants
- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.
Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel
Condition monitor with display and an integrated gateway
Recognising connections – optimising maintenance
Insulation monitoring device for inverter applications and large industrial plants
- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.
Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel
Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel
Condition monitor with display and an integrated gateway
Recognising connections – optimising maintenance
Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems.
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
Electronic equipment for use in power installations
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
